Refrižeratorius puspriekabė Krone SD
















Jei nusprendėte įsigyti technikos už stipriai žemesnę, nei vidutinė rinkos kainą, būtinai iš pradžių susisiekite su pardavėju. Sužinokite apie technikos savininką kiek įmanoma daugiau. Vienas iš sukčiavimo būdų – apsimesti įmonės atstovu. Kilus įtarimams užpildykite formą, kad mes galėtume įvertinti situaciją ir imtis reikiamų veiksmų.
Prieš apsisprendžiant ką nors įsigyti įdėmiai peržvelkite kelis pasiūlymus ir įvertinkite, kokia Jūsų pasirinktos technikos vidutinė rinkos pardavimo kaina. Jei Jums patikusio pasiūlymo kaina stipriai mažesnė, susimąstykite. Esminis kainos skirtumas gali reikšti paslėptus technikos defektus arba pardavėjo bandymą sukčiauti.
Nepirkite technikos, kurios kaina stipriai skiriasi nuo vidutinės rinkos kainos.
Nesutikite su abejotinais pasiūlymais keistis įranga ar iš anksto mokėti už ją. Kilus abejonėms nebijokite viską išsiaiškinti. Reikalaukite daugiau fotografijų ir technikos dokumentų, tikrinkite dokumentų autentiškumą, klauskite.
Tai dažniausiai pasitaikantys sukčiavimo atvejai. Nesąžiningi pardavėjai gali prašyti sumokėti avansą, kaip technikos įsigijimo „garantą“. Tokiu būdų sukčiautojai gali sukaupti nemažą pinigų sumą ir pradingti.
- Piniginių lėšų pervedimas į banko kortelę.
- Kilus abejonėms dėl pardavėjo, nedarykite avansinių mokėjimų be pinigų pervedimą patvirtinančių dokumentų.
- Piniginių lėšų pervedimas į „patikėtinio“ sąskaitą.
- Tokie prašymai iš karto kelia įtarimų, Jei tai Jūsų atvejis, greičiausiai susidūrėte su sukčiavimo atveju.
- Piniginių lėšų pervedimas į panašaus pavadinimo įmonės sąskaitą
- Būkite atidūs. Sukčiautojai, nežymiai pakeisdami įmonės pavadinimą, gali bandyti apsimesti gerai žinomų kompanijų atstovais. Nepervedinėkite pinigų, jei dėl įmonės kyla abejonių.
- Asmeninių rekvizitų pateikimas tikros kompanijos sąskaitoje
- Prieš darydami piniginį pervedimą įsitikinkite, kad sąskaitoje nurodyti rekvizitai yra teisingi ir priklauso nurodytai kompanijai.
Pardavėjo kontaktiniai duomenys




















The heart of this semi-trailer is the reliable Thermo King SLXe 300 unit running on R404A refrigerant.
Extremely low hours: The unit has only run a total of 3344 engine hours! This is a fantastic, fully original result. The cooling unit is not worn out.
Operational condition: The engine runs quietly and smoothly. The cooling system is highly efficient—it drops to the target temperature quickly and holds deep freezing temperatures without any issues.
Control & Recording: Equipped with the intuitive SmartReefer 3 controller and an additional, independent temperature recorder on the front wall, allowing full control and printing reports for demanding cargo receivers.
ATP Certificate (FRC Class) valid until AUGUST 2028
This is a massive advantage of this trailer. The FRC certificate (reinforced class of refrigeration insulation) was freshly renewed based on official tests at the COCH center in Krakow.
Instead of a standard, short-term ATP, you have peace of mind and guaranteed validity until August 2028
The heat transfer coefficient K is only: 0.353 W/m²K, which confirms the excellent condition and tightness of the walls and roof insulation. No thermal bridges or foam degradation.
Multi-Temp System with movable partition wall
This trailer offers great flexibility when planning loads:
Inside the cargo bay, there is a fully functional, lightweight, and easy-to-use movable partition wall (bulkhead) that can be easily slid and locked in place.
Thanks to the air duct and the divided space, you can easily transport cargo requiring completely different temperatures on a single trip (e.g., frozen goods in one section, and fresh vegetables or dairy in the other).
Major Service & Preparation for the Road (10,000 km ago)
I took care of this trailer on a regular basis, without waiting for breakdowns on the road. Exactly 10,000 km ago, it underwent a major technical inspection, during which we did:
Complete revision of the running gear: Checked brakes, calipers, discs, and air suspension bags. Everything is 100% functional.
Brand new set of tires: Installed brand-new Blacklion BT180 tires. The tread is practically untouched (minimal wear after 10,000 km)—saving you a major expense right at the start.
Cooling unit service: Inspected the refrigerant system for leaks, checked the freon loop, and replaced filters and fluids. The unit is fully prepared for both summer and winter routes.
Chassis, Frame, and Additional Equipment:
SAF Axles: Reliable axles on pneumatic suspension with disc brakes.
Exterior look: Rims painted in an elegant matte black with red accents on the wheel bolts—the trailer looks great hooked up to any truck. The frame is healthy and completely rust-free.
Wabco SmartBoard: On-board computer mounted on the frame—allows you to quickly check axle loads, EBS system status, and any potential errors without needing to connect an external computer.
Cargo Box: Aluminum (hygienic) floor in very good condition, straight, without deep gouges from pallet jacks. Solid cargo tracks on the side walls for securing straps and locking bars (securing bars included in the price).
Accessories: Double spare wheel carrier, large lockable toolbox, solid rubber roller bumpers at the rear protecting the doors when backing up to loading docks.
Technical Data from the Registration Document:
Brand and model: Krone SD
Year of manufacture: 03/2025
Registration number: LU 286PP
Technical inspection valid until: 21.05.2027
Empty weight: 9,200 kg
Payload capacity: 26,800 kg (GVW / DMC: 36,000 kg)
The semi-trailer is available for inspection in Rzeszow, Poland. Sold on a VAT invoice basis or for export.
Contact: rodyti kontaktus
Price: 21 000 EUR NETTO (For Export)